AJAX Hub Hybrid Intruder Alarm Panel

The Hub Hybrid intelligent control panel is a core element of the AJAX security system. The device monitors operation of all AJAX detectors in an encrypted format, analyses the data, and in case of alarm, notifies the system owner and the Central Monitoring Station. It can be mounted in just a few minutes using the SmartBracket mount. Supporting 100 devices, 50 users and up to 25 IP cameras. The alarm incorporates 2 communication options LAN & Dual SIM Slots to guarantee alarm notifications are sent to your phone or alarm receiving centre.

The device uses Jeweller radio technology to monitor the detectors and ensure a quick response to danger. It switches the entire system to clear frequencies during jamming. The device is protected against viruses at software level.

Fibra communication technology allows you to wire independent lines up to 2km long. Eight lines in one system run by Hub Hybrid minimize potential damage. Even a completely broken line leaves the security system at 87% operational. And with wireless sensors, this percentage will be even higher. With Fibra, you get the flexibility to build a star topology or use 8 lines as zones in an iconic burglar alarm. In any configuration, you get an intelligent security system.

Jeweller radio protocol provides two-way communication between the hub and wireless devices at a distance of up to 2,000 meters, allowing remote system control and alarm transmission in 0.15 seconds. Jeweller applies time frames to synchronize devices communication, authentication to prevent forgery, and encryption to protect the data. An energy-efficient protocol provides wireless devices with up to 7 years of battery life.

Up to 5 range extenders with a communication range of up to 1,800 meters can be connected to Hub Hybrid by radio or cable via Ethernet.

Hub Hybrid features 8 lines and supports ring connection topology — up to four rings in a hybrid security system. In the event of a line breakage, the ring splits into two working segments, devices continue to operate, and the system notifies a security company and users about the incident.

Hub Hybrid supports both MotionCam and MotionCam Outdoor wireless motion detectors. When triggered, detectors take a series of photos, helping to evaluate the situation at the facility. Visual verification helps you instantly assess the situation, saving users from concerns, and security companies — from unnecessary dispatches.

Key Features

• 4-Core cable bus connection
• 8 bus input lines compatible with Fibra device only
• Bus line length up to 2000m When using the U/UTP cat.5 twisted pair
• up to 14.4 W for all connected wired devices 
  
• Wireless communication up to 2000m (open space)
• Up to 100 devices / sensors connected
• Supports PIR Cameras for Visual Alarm Verification
• Built-in tamper and anti jamming protection
• 2G Dual SIM & LAN communication
• Grade 2, CE
• Easy & quick App setup
• Available in black or white