DS-3T1306P-SI/HS Hikvision 4 Port PoE+ 1Gbps Smart Switch +1 Gbps Network Port +1 Gbps Fiber Optical Port
- INFO
- SPECS
- DOWNLOADS
- RELATED
- VIDEOS
Hikvision DS-3T1306P-SI/HS 4 Port Gigabit Managed PoE Switch
DS-3T1306P-SI/HS is a 4port managed network switch. The switch provides 4x 1000Mbps PoE (Power over Ethernet) ports, 1x 1000Mbps RJ45 network port and 1x 1000Mbps fiber optical port . Supporting IEEE 802.3af/at/bt standards and with a maximum budget of up to 30W on ports 1-4. Switch on the long-range transmission for PoE up to 300m.
Key Features
- 4 × 1000Mbps PoE RJ45 ports, 1 × 1000Mbps and 1 x 1000Mbps fiber optical port.
- IEEE 802.3at/af standard for PoE ports.
- Network topology management, alarm push, network health monitor.
- 6 KV surge protection for PoE ports.
- AF/AT camera can reach up to 300 m in extend mode.
- Management using Hik-Connect Pro App and IVMS-4200 software.
- Port Isolation
- PoE watchdog
- Dimensions: 158.00 mm × 101.20 mm × 31.60 mm
- General
- ShellMetal material
- Net Weight0.4 kg (0.8 lb)
- Gross Weight1.0 kg (2.2 lb)
- Dimensions (W × H × D)158.00 mm × 101.20 mm × 31.60 mm (6.20'' × 3.90'' × 1.20'')
- Operating Temperature-30 °C to 65 °C (-22 °F to 149 °F)
- Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
- Operating Humidity5% to 95% (no condensation)
- Relative Humidity5% to 95% (no condensation)
- Power SupplyPower adapter: 48 VDC (working temperature: 0°C to 45°C); Grounding terminal: 48-57 VDC (working temperature: -30°C to 65°C)
- Installation ModeDesk-Mounted,Rail
- Max. Power Consumption65 W
- Power Consumption In Idle5 W
- Surge Protection6 KV
- Network Parameters
- Ports4 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
- MAC Address Table2 K
- Switching Capacity14 Gbps
- Packet Forwarding Rate10.42 Mpps
- Internal Cache1 Mbits
- PoE Power Supply
- PoE StandardIEEE 802.3af,IEEE 802.3at
- PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
- PoE PortPoE: Ports 1 to 4
- Max. Port Power30 W
- PoE Power Budget60 W
- Software Function
- Long Range
Ports 1 to 4: up to 300 m.
Long range performance may vary depend on camera model or cable condition.
- Port Isolation
Ports 1 to 4: port isolation mode to improve network security.
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
- PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
- QoS
QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.
Support port-based priority configuration.
Support SP, WRR priority schedule mode.
- VLAN
VLAN is used for network scale planning and network health improvement.
Support 802.1Q.
Configurable VLAN ID from 1-4094.
Support Trunk, Access port mode.
Support Max. 4094 VLAN.
- HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display topology information.
4. Display the alarm status.
5. Restart ports and devices.
6. Remotely upgrade the device.
- Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP/RSTP/ERPS
- System MaintenanceSupport remote upgrade, default parameter restoration, logs viewing, basic network parameter configuration, import and export configuration, and time synchronization.
- Approval
- EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
- SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
- Chemistry
CE-RoHS (201165EU);
WEEE (201219EU);
Reach (Regulation (EC) No.19072006)
