DS-3WF02-5AC/D Hikvision 5GHz 867Mbps Outdoor Wireless Bridge Kit Up To 5Km
- INFO
- SPECS
- DOWNLOADS
- RELATED
- VIDEOS
Hikvision DS-3WF02-5AC/D Outdoor Wireless Bridge Kit
DS-3WF02-5AC/D allows for quick and convenient configuration of a wireless bridge between two networks, eg in separate buildings. The device works in the 802.11 a/n standard, and has have been equipped with a powerful 12dBi antenna. Two of these devices are required to create a PTP Bridge, and additional devices are required for a 1 point to Multipoint Bridge.
The devices are additionally equipped with 2 LAN ports, one of which enables powering the device and connection to the LAN network, while the other allows for providing access to the network to another device without using additional switches.
Key Features
- Standard PoE in
- 2 x 100Mbps RJ45 ports
- Quick match through DIP switch
- Support PtP or PTMP (1 to 4)
- Visualized topology management
- Up to 5 km wireless transmission distance
- General
- Product Dimensions (W × H × D)90.8 mm × 187.87 mm × 57.87 mm (3.58'' × 7.4'' × 2.28'')
- Package Dimensions (W × H × D)256 mm × 231 mm × 86 mm (10.07" × 9.09" × 3.38")
- Net Weight0.26 kg (0.57 lb) per device
- Gross Weight1.1 kg (2.43 lb)
- Packing ListWireless Bridge × 2,PoE Power Supply × 2,AC Cord × 2,Quick Start Guide ×1,Regulatory Compliance and Safety Information × 1,Binding Tape × 4
- Packing MethodPacking in pairs
- Working Temperature-30 °C to 65 °C (-22 °F to 149 °F)
- Working Humidity5% to 95% (no condensation)
- Storage Temperature-40 °C to 80 °C (-40 °F to 176 °F)
- Storage Humidity5% to 95% (no condensation)
- Installation ModePole Mounting
- Ingress ProtectionIP55
- Power Consumption2.43 W for typical (1-ch 2MP IPC), Max. 3.6 W
- Wireless Parameter
- Max. Transmission Rate of Air Interface≤ 867 Mbps
- Wireless StandardIEEE 802.11/a/n/ac
- Working Frequency Band5150 MHz ~ 5250 MHz,5250 MHz~ 5350 MHz,5470 MHz~ 5725 MHz,5725 MHz~ 5825 MHz
- Antenna Gain12 dBi
- Antenna Angle(H) Beamwidth [3 dB] 35° (V) Beamwidth [3 dB] 35°
- Transmitting Power22 dBm @11ac MCS0 (Note: Transmitting power may vary with local regulations.)
- Receiving Sensitivity-84 ±2dBm@AC80-MCS0
- Throughput RatePTP: ,90 Mbps/0.5 KM(AC80),90 Mbps/1 KM(AC80),40 Mbps/5 KM(AC80),PTMP(1 to 4): ,80 Mbps/1 KM(AC80)
- PoE Power Supply
- PoE PortAP: LAN1 802.3af/at PoE IN; CPE: LAN1 passive PoE IN, LAN2 802.3 af PoE OUT
- PoE Power Budget10 W
- PoE Distance100 m
- Hardware Parameter
- Network Interface2 × 10/100 Mbps RJ45 ports
- LED IndicatorPower indicator,LAN indicator,Signal intensity indicator
- ResetHardware resetting button
- Power Supply48V PoE/12~24V DC;Check the physical interface image below for more details.
- Software Function
- Application FunctionIFM,IPM,DFS,TPC
- Channel Width20/40/80 MHz
- Channel SelectionAuto/manual selection
- Security ModeWPA2-PSK
- Security MechanismWireless network name hidden
- Network ProtocolNTP (network time synchronization),SADP (auto search for IP address), HTTPS/HTTP (web management),SSH (debugging)
- Management MethodHCP,Web,iVMS-4200,HPP
- System LogSyslog,Control center information
- UpgradeWeb,iVMS-4200,HCP,HPP
- HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Reboot device
2. Restore device
3. Display the topology information
4. Display the connection status between AP and CPEs, including signal intensity, backgroud noise, sending & receiving rate.
5. Configure wireless settings, including working mode, SSID, password, channel, channel bandwidth, transmitting power
6. Bridge alignment
7. Spectrum scanning
8. PoE output management
- Approval
- EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
- SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
- ChemistryCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
- RadioEN 301 893,EN 300 440,EN 62311,EN 301 489-3,EN 301 489-17
