DS-KD8003-IME1/S is the main module for the door station to which you can add further modules if required, and incorporates a 2MP wide angle low light camera with built-in IR illumination, microphone, speaker, noise suppression, echo cancellation and call button built in a IP65 weatherproof housing. The door station supports up to 2 mag locks or 2 door strikes (powered separately), plus 2 exit buttons. Add a single way, 2 way or 3 way back box for installation onto a wall surface.
The unit can be powered using PoE (Power over Ethernet) or 12V DC making it very simple to install, connecting to the indoor station using IP protocol over the local network. You can answer calls & open the gate using the indoor touch screen and remotely via mobile app or via PC using IVMS-4200.
When used alongside a Hikvision NVR or DVR its possible to add the door station camera to the recorder.
System Parameters | ||
---|---|---|
Operation System: | Embedded Linux Operation System | |
Operation method: | Physical Button | |
Processor: | Embedded MCU Processor |
Camera Parameters | ||
---|---|---|
Field of view: | 180° (Horizontal), 96°(Vertical) |
Audio Parameters | ||
---|---|---|
Audio Input: | Built-in Omnidirectional Microphone | |
Audio Output: | Built-in Loudspeaker(More than 85dB within 20 cm) | |
Audio Compression Standard: | G.711 U | |
Audio Compression Rate: | 64 Kbps | |
Audio Quality: | Noise Suppression and Echo Cancellation |
Video Parameters | ||
---|---|---|
WDR: | Supported | |
DNR: | Supported | |
BLC: | Supported | |
Camera: | Low Illumination 2 MP HD IR Camera | |
Video Compression Standard: | H.264 | |
Resolution: | Main Stream: 1920 × 1080 Sub Stream:720 × 480 | |
Anti-flicker frequency: | 50 Hz, 60 Hz |
Network Parameters | ||
---|---|---|
Network Protocol: | TCP/IP, RTSP | |
Ethernet: | 10/100 Mbps Self-Adaptive Ethernet |
Light Supplement | ||
---|---|---|
Light Supplement Mode: | IR Supplement |
Alarm Parameters | ||
---|---|---|
Tampering alarm: | 1 |
Device Interfaces | ||
---|---|---|
Debug: | 1 | |
Module-connecting: | 1 | |
Relay Output: | 2(30V, 1A) | |
I/O Input: | 4 |
General | ||
---|---|---|
Installation: | Flush Mounting, Surface Mounting | |
Power Supply: | IEEE802.3af standard PoE, 12 VDC/1A | |
Power Consumption: | ≤10 W | |
Physical button: | 1 | |
Working Humidity: | 10% to 95% | |
Working Temperature: | -40° C to +60° C (-40° F to 140° F) | |
IP Protection Level: | IP65 | |
Dimensions(L × W × H): | 98mm × 99.8mm × 43.9mm(3.86"× 3.93" ×1.73") |